Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2011 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Swapping in alternator 140-160

posted by  cef2lion on  Mon Mar 19 03:59 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 9 05:17 CST 2014
[RELATED]

I have a 68 144S with a generator. Been searching and reading here about changing to an alternator as the generator I have was changed to a delco and the belt does't line up anyway. Have a few questions.

My B18 engine appears to have the alternator ear.

What type of bolt to use to mount alternator assuming I really do have the ear? Do all alternator require putting a bend in the adjust arm? Of the delco and Bosch is there a recommendation for which models to look for?

Read about using a delco 1 wire? Are there links to instructions on how to go from three wire generator to a one wire delco? I read something about the amp light and going to the one wire. Does the light no longer work?

Are the Bosch alternators that would work three wire?

I assume that both alternator have internal regulators. There is an IPD external regulator mentioned in some threads.

Craig






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Swapping in alternator [140-160]
posted by  cef2lion  on Mon Mar 19 03:59 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.