Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rear end noise 200 1988

I have some clunking & rubber squish type sounds from some suspension component or other in the rear end of my 240 wagon.

In the last year and a half I have replaced the rear shocks, replaced the torque rod bushings with poly, and 2 weeks ago replaced the trailing arm bushings with poly bushings.

I still hear a clunk sometimes, and an odd rubber type squishy noise.

For the clunk I'm wondering about the internal brake shoes for the parking brake. Any easy way to check the operation of these? The parking brake does hold. Not too sure about the rubbery noise, especially because the new poly TABS just have an internal metal sleeve with no rubber inside that the bolt rides on like the old ones.

I suppose the clunk could be the bolts in the bushings as the car switches direction after backing out of the drive.

Any ideas?
Could the brake shoes for the parking brake sieze up inside the drum if they were to come loose?

Thanks

Mike
macs245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rear end noise [200][1988]
posted by  someone claiming to be macs245  on Thu Nov 2 08:09 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.