Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2018 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Intermitant ABS / ABS doesn't work / ABS OBD LED slightly lit when jumpered 900

posted by  xluke on  Mon Oct 30 09:08 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jan 16 15:48 CST 2009
[RELATED]

This is relating to a 1994 940 n/a wagon:

Hello,
My '94 940 ABS light came on the other day.
1) I moved the car 50 feet with the parking brake on (which I normally never use), and then I noticed the light, I don't know if this is related.
2) The ABS light went off the next time I turned off the car but when going over a large patch of ice, the ABS did not seem to work (no on/off brake action) even though I was sliding for about 40 feet.
3) The light now comes on sometimes, and other times not.
4) I tried to get the codes from the OBD but when I jumper it, the LED lights slightly (but not as bright as when I push the botton), and although the LED does light brightly when I press the button, I don't get any codes, not even a 1-1-1.
5) Finally, my rear brake pad is completely gone and gouging my rotor. I'm replacing them tomorrow, I don't know if that could be related.

Thanks again!






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.