Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

code 2-1-2 & breaks hissing at the pedal 900

posted by  MFFL on  Sun Oct 29 04:42 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi All,

I have a 1995 960 with 128K miles. The break pedal when pressed sound like it has a vacuum leak and I can hear a very loud hissing sound. I am also experiencing a very noticeable rough idle at stops when idling, and the rpm jumps up and down and the car almost dies. I read the code and have a 2-1-2. Looked it up and it points to a faulty Oxygen sensor. My question is could it be that I really just have a ruptured break booster and it is causing the rough idle. Could a break booster cause the rough idle? I think I read in one of the posts that the break booster can leak in to the intake.

Any help would be greatly appreciated.

Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New code 2-1-2 & breaks hissing at the pedal [900]
posted by  MFFL  on Sun Oct 29 04:42 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.