Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Suspension questions 200 1981

posted by  pbryantr on  Fri Aug 11 09:22 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 19 12:45 CST 2014
[RELATED]

Re: '81 242, stock except for IPD sways.

My car rattles over bumps. I'm thinking about replacing bushings and shocks with Bilstein HDs. I want to a) eliminate the rattling and b) make the ride a little more firm.

I've already looked over some websites but I want more answers. I asked a suspension related thread some while back and I ended up with a smarty-pants answer, so I'm serious this time and more specific with my objectives and questions.

So, here goes:

1. While I'm in there, anything I should look for/replace?

2. Do Bilstein HDs work OK with stock springs or should I consider lowering springs? Is it just better to cut a coil or two off the stock springs? I have the stock wheels I plan to keep and paint black and install Euro center caps.

3. Are chassis braces a must? I plan to get the firewall to strut braces. Should I get the GT strut mount plates in the ipd catalog?

As always, thanks for the input.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Suspension questions [200][1981]
posted by  pbryantr  on Fri Aug 11 09:22 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.