Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil leaks 1987 740 turbo 700

posted by  Wireman on  Tue Jan 24 13:02 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 1 09:42 CST 2010
[RELATED]


I have just completed a rebuilt head on a 740 turbo, car new to me, with new gaskets, o-rings, etc. I have oil dripping from the engine and it appears to be coming from two areas.

1. From the right rear corner of the engine in the area of the cam cover. I have replaced both o-rings and the internal seal in the cam mounted distributer and it does not appear to be leaking. Is the cam cover gasket in the corner a problem to seal?

2. From the base of the turbo, in the area where the return pipe exits from the base. The base area is wet with oil and it is hard to see if it is coming from the flange for the reurn pipe or not. Is the base area a place that would normally be wet if the internal seals of the turbo are leaking? Or is most likely from the flange of the reurn pipe? It's hard to tell just by observation.

Thanks for any helpful suggestions.

Gary






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil leaks 1987 740 turbo [700]
posted by  Wireman  on Tue Jan 24 13:02 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.