Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2024

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 motor mounts skewed. 1984

posted by  jaydee on  Thu Oct 27 16:08 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I replaced both motor mounts and the trans mount in my 84 240 with a B23F about 4 months ago. I noticed last evening that while the driver side mount sits quite straight up and down, the passenger side mount is heavily skewed, as though there are lateral forces pulling it or pushing it to the left even when the car is shut off. IS this a normal situation, or is it possible that I installed it incorrectly? I thought that there was only one way it could be installed, but perhaps I was incorrect in that assumption. Can any one suggest what may be wrong?
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 motor mounts skewed. [1984]
posted by  jaydee subscriber  on Thu Oct 27 16:08 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.