Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2010

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

134a Compressor pivot point

posted by  Duck on  Wed Jun 22 17:11 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 30 21:00 CST 2014
[RELATED]

On a 1994 940 8 valve B230 with a Volvo compressor model SS-121DS5, a Japanese model none-the less.
Where is the bottom pivot points when facing the engine from the front. There seems to be several choices to me.
I have realesed the micro-adjust mechanism but now which is the pivot point at the bottom??








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    134a Compressor pivot point

    posted by  Rule 308 on  Wed Jun 22 19:39 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Tue May 8 09:20 CST 2012
    [RELATED]

    It should be where the two bolts go through the brackets that are bolted to the compressor top and bottom and through the accesorie mount bushings that are pressed into the accesory mount bracket that is bolted to the block. There should be only 4 bolts holding the compressor to the bracket, 2 top and 2 bottom. Take out the for bolts and it should come right out.

    Mark







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.