Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 5/2005 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

leaking oil 740 tubo garrett 700 1989

posted by  D_Root on  Mon May 2 13:32 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

ok after close inspection I am not leaking oil out of my turbo or the rear main seal. It looks like I am leaking out of were the oil filter screws in and there two lines coming out of the same area what other seals are in that area that I could replace and were can I get the seals and is that what FCP Groton calls the Low end seal replace ment








  REPLY TO THIS MESSAGE    PRINT   SAVE 

leaking oil 740 tubo garrett 700 1989

posted by  Andrew in AL on  Mon May 2 14:50 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:17 CST 2014
[RELATED]

I have the same prob. I am not sure if it is one or two - but they are good sized o rings. Only neg I have heard is that the nut that is behind the filter (that needs to come off) is pretty good size - so make sure that you have that size.

--
'Be blessed in your quest'' 89 764 (110K), '94 940T (180K)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.