Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2010 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

wheels! 140-160 1968

Hi again,
I would like to know if it is possible to put 16x7.5" or 16x7" wheels on a 140 series.
Thanx








  REPLY TO THIS MESSAGE    PRINT   SAVE 

wheels! 140-160 1968

Hi all

I have a 74 144

I have had Volvo Geminis 16x7 inch wheel on it they are 20 offset there is no rubbing on full lock

See pics You might have to cut and paste the ULR

http://us.f1.yahoofs.com/groups/g_3285670/aussie_264/Private+import+74+144+(front).jpg?bce_CdCBFBYOPKWs

http://us.f1.yahoofs.com/groups/g_3285670/aussie_264/Private+import+74+144+(rear).jpg?bce_CdCBqdGFQTS8


I also have tried Volvo Colombas(850 T-5 wheels) they are 16x6.5 and they are 38 offset. They rub on swaybar on full lock long wheel studs and 10 to 15 mm spacers will fix this








  REPLY TO THIS MESSAGE    PRINT   SAVE 

wheels! 140-160 1968

Here ya go 16x7 on my 145
--








  REPLY TO THIS MESSAGE    PRINT   SAVE 

wheels! 140-160 1968

Absolutely! It all depends on the offset of the wheels and the bolt pattern though... So what're you working with? A wheel with a 5x108(or 5x4.25") bolt pattern is required, and an offset between 15-35 *should*(shoot for the middle, as in +20 or +25mm would be best) work in those sizes.
--
Kyle - '68 142? - Oregon Volvo Tuners?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.