Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2006 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

which is easier (quicker) 700

posted by  daveb272 on  Thu Apr 28 15:49 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

i need to get rid of my 3.91 gears for a my other 3.54. My question is to swap the whole rearend? or just the pumkin? (gear chunk)
--
85 740 b230f+t








  REPLY TO THIS MESSAGE    PRINT   SAVE 

which is easier (quicker) 700

posted by  Rolyak on  Thu Apr 28 16:17 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:03 CST 2014
[RELATED]

The Volvo's I'm familiar with use the Dana / Spicer style rear axle so there is no "punkin" or "pig". Everything comes out the back(one piece at a time) and to do it right you will need some special tools, spreaders maybe, shims, dial gauges, etc.

The short answer: change the entire axle.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.