Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2023 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

clutch friction plate question 200 1977

posted by  smosit on  Fri Apr 22 07:56 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 18 10:01 CST 2007
[RELATED]

hello,

i usually frequent the yahoo 1800-list group; but since i'm trying to put a B230 motor in my 1800, i might end up posting some questions here too.

SO, here's my question......can someone confirm or deny that the friction plate for a 262 with an M46 transmission is 9" in diameter and has a 1" with 10-spline hub? this is what an online database said, and it's what i need to make my current configuration work (B230 motor with an 1800 M410 transmission).

thanks in advance,

ryan
'67 1800S (soon to have a B230)
'73 1800ES







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    clutch friction plate question 200 1977

    posted by  someone claiming to be Rhys on  Fri Apr 22 14:21 CST 2005 [RELATED]

    The ten spline input shaft was used to somewhere in the middle of the 1978 model year. After that, the 21 spine (or is it 22?) was used. So if the 262 is very early production it may well be 10 spline.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.