Volvo RWD 140-160 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 3/2008 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Part #s for crank lip seal... 140-160

Someone was asking about this the other day. Since all the info was right in front of me, thought I'd post.

Crank front lip seal in modified cover from RPR Volvo: "Elring D" 52x68x10.

Lip seal included in Volvo #271944 steel gear set: Plastic part bag Volvo #8260000. On seal itself "Volvo 1276425 CFW IMP". This looks like a very high-quality part.

Later,
Al








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Part #s for crank lip seal... 140-160

    These are the standard front and rear seals for the B30 and the 74-75 B20.
    P/N in book are 1276424 for the timing cover,
    430118 for the rear main seal. The same seals are used on B21 and B23
    engines also, so they are READILY available. So are modified timing covers
    and rear seal housings. (ask me)
    --
    George Downs Bartlesville, Heart of the USA!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Part #s for crank lip seal... 140-160

    When I worked in a Volvo parts department we found a seal that would work in the stock front housing with no modification. I believe it was a 140 rear axle seal,but I don't remember the part number. It was light blue in color. Maybe somebody out there has done the same and has the part number.

    Jim







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.