Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2019 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

source for a dual header pipe with a 2 inch outlet? 120-130

posted by  LowellBlvd on  Sat Apr 9 04:05 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Is there a source for a dual header pipe with a 2 inch outlet?
I would like to route the exhaust from my B20 through a 2 inch system.
Thanks








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    source for a dual header pipe with a 2 inch outlet? 120-130 1966

    posted by  walrus3 on  Sat Apr 9 16:27 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Dec 2 14:20 CST 2013
    [RELATED]

    Probably an exhaust pipe from a FI B20 (1973 or later) would be a good place
    to begin. I got one for a 75 B20 for mine, simply because more pipe would
    have to be fabricated and shipping was a lot cheaper for the shorter 240
    pipe.
    --
    George Downs Bartlesville, Heart of the USA!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.