Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2005 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

D-Jet injector flow? 140-160

posted by  Billiam500 on  Mon Apr 4 07:23 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

What is the flow rate for D-jet injectors? I am putting MS in by 142E and can't remember what the rating is. Is 36 lbs/hour?
--
And now for something completely different.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    D-Jet injector flow? 140-160

    uid 5098's pic
    posted by  Sil on  Mon Apr 4 08:36 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 07:24 CST 2014
    [RELATED]

    This probably doesn't answer your question, but these are the data I have: Pump delivers 25.6 US Gallons at 28lbs/sq.inch.
    Injector 30 second pulsed flow = 68 mL
    Bob S.








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Not even close! 140-160

      posted by  Ken C on  Tue Apr 5 13:08 CST 2005
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 11:39 CST 2014
      [RELATED]

      And assuming gas weighs about 6 to 8 lbs per gallon?

      So for the question, is it 36 lbs/hr?

      68 ml/30 sec = 136 ml/min.

      60 x 136 ml/min = 8.16 liters/hr = 1.8 gal/hr

      6 lbs/gal x 1.8 gal/hr = 10.8 lbs/hr.
      or if it weighs 8 lbs/gal, then 14.4 lbs/hr.

      Neither are even close to 36 lbs/hr! So something is wrong -- probably the 68 ml per 30 sec., or the memory that it should be 36 lbs/hr?







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    D-Jet injector flow? 140-160

    posted by  Niel on  Mon Apr 4 08:34 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Thu Oct 23 12:56 CST 2014
    [RELATED]

    Interestingly, my Volvo workshop manual does not say. Suggest you search for an injector manufacturer, who should have a spec sheet.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.