Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2016 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Early Model Hubcaps 200 1986

I was wondering if these early model hupcaps: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43961&item=7965629637&rd=1
Would fit on the later model steel wheels?
Thanks








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Early Model Hubcaps 200 1986

    Yeah those fit with all your standard 14" 240 rims. Unlike the ad copy on Ebay, they DO NOT fit any aluminum alloy wheels. They are made to clamp to the center hub, which is exposed only when steel wheels are fitted.

    My neighbor's got a set on her 87 240, and I've had them on almost all my others at one time or another. Standard offering for all DL models from 1980 or 81 through 1985. They can usually be found really cheaply at junkyards, most people don't want them, and the cars with them are getting junked by the dozens.
    --
    Rob Bareiss, New London CT ::: Roterande Fläkt Och Drivremmar!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Early Model Hubcaps 200 1986

    Yup, as far as I can tell, those are the ones I have on mine (an 89, I took the hubcaps from an 85). They also come with beauty rings/trim rings that go around the outer edge or the rim.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.