Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 S90-V90 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

posted by  HX720R on  Sun Apr 3 15:38 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 1 02:59 CST 2007
[RELATED]

Are all 960 wheel offsets the same as FWD Volvos?
Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

posted by  Kane on  Sun Apr 3 15:56 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

'95+ 960s have the FWD offset. '94 and earlier have a RWD offset.

-- Kane
--

While I would never deliberately mislead anyone, take into consideration that any information and advice provided was at no cost to you.

6 Volvos in SoCal, from '64 to '94. See profile for fleet infomation.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

posted by  HX720R on  Mon Apr 4 02:02 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 1 02:59 CST 2007
[RELATED]

So I could use S60 or S80 wheels on my 97 965?
Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

uid 19's pic
posted by  jbowers on  Mon Apr 4 06:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 22 13:49 CST 2012
[RELATED]

Subject to a limit of 6.5 inches in width. Anything wider and you may hit the front struts. I tried a 7 inch wide S80 wheel on my car and it only cleared by about 1/32 of an inch. I estimated when I cornered the rim would be rubbing the strut. Or, if an alignment made the camber shift a little or.....
--
'96 965, 16' wheels, rear 18mm bar & Koni + 204HP cams at 124K. Had '85 745 Turbo Diesel for 200K.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

posted by  CW on  Mon Apr 4 07:32 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Feb 5 13:37 CST 2008
[RELATED]

I thought S90 SE 16" alloys were 7" wide(?) I could certianly be wrong, but I thought I read that somewhere. Maybe their offset is slighly different or something. I forget what those wheels are called; Murcellus or something like that. 1/32 of an inch certainly isn't much!
--
Chris. Halifax N.S. '91 745Ti, 291K km and '91 745 NA, 392K km.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

posted by  Patrik SWE on  Tue Apr 5 06:20 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 15 22:25 CST 2010
[RELATED]

Yes, "ANDROMEDA" alloys were 7x16" and offset 43 mm.

Newer 16" wheels fom S60, V70 and S80 have different offset: 49 mm.

But newer 15" wheels (not the new S40/V50) have the old offset 43 mm.
--
Patrik, Sweden '98 V90 w/ M90








  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

posted by  someone claiming to be Al on  Tue Apr 5 16:01 CST 2005 [RELATED]

Figures that the 960 and the S60 wheels have different off sets. I was over at my Indy mechanics shop and he has 2 sets of S60R wheels on the shelf that I thought might look good on my Black 960.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

960 Wheels S90-V90

posted by  SteveSC on  Thu May 19 00:58 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 28 20:28 CST 2011
[RELATED]

What is the offset on the R wheels? What does he want for the other set?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.