Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Control Arm Bushing (at Radius Rod)

Has anyone replaced theses bushings(4)? It looks like a royal pain but one side is pretty worn so I have to do it. I just replaced the inner tie rods and the wobble is almost all gone............any thoughts?
-Bob








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Control Arm Bushing (at Radius Rod) 700

It is not difficult, and the bushings are certainly needed. I use the poly bushings that IPD or FCP Groton sell. See the 700/900 FAQ for details.
--
john








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Arm Bushing (at Radius Rod)

Hello Bob; What is the year and model type of your vehicle?
--
Gary Gilliam Sumerduck VA, '94 940 na Regina 150k, '86 240 180k








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Arm Bushing (at Radius Rod)

1989 740gl







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.