Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Control Arm Bushing (at Radius Rod)

posted by  BDAY55 on  Fri Apr 1 10:10 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Has anyone replaced theses bushings(4)? It looks like a royal pain but one side is pretty worn so I have to do it. I just replaced the inner tie rods and the wobble is almost all gone............any thoughts?
-Bob








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Control Arm Bushing (at Radius Rod) 700

    uid 55's pic
    posted by  john sargent on  Sat Apr 2 06:08 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 09:07 CST 2014
    [RELATED]

    It is not difficult, and the bushings are certainly needed. I use the poly bushings that IPD or FCP Groton sell. See the 700/900 FAQ for details.
    --
    john







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.