Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2004 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

vaccum hose sizes 700 1989

was getting ready to place an order for some vacuum hose for my SAAB, and thought i'd order some extra for my 89 740 Turbo.

generally speaking, what sizes should i be picking up?

The Saab needs 3.5mm and 6mm.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

vaccum hose sizes 700 1989

4.2mm and 6.6mm

4.2mm is for most everything under the hood. My 765T used the 6.6mm only for the cruise control system.

Bean
--
'80 242GT 93k, '94 945T 143k, '89 765T 68k (new '94 B230FT)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

vaccum hose sizes 700 1989

are those inner diameters?


or those sizes found just on volvo's, or are they somewhat commone for european cars?

thanks

bruce








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

vaccum hose sizes 700 1989

I do believe they are inner diameter, not sure if they are standard sizes for european cars. I do know that they are common for Volvo.

Bean
--
'80 242GT 93k, '94 945T 143k, '89 765T 68k (new '94 B230FT)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.