Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

vacuum hose system 200 1987

about to get yearly inspec., is there a way to check for leaks without expensive instruments/procedures??








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    vacuum hose system 200 1987

    Check out this website. Using the propane works great.


    http://hostingprod.com/@aa1car.com/library/vacleak.htm
    --
    1990 240 DL, 150k, auto








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    vacuum hose system 200 1987


    rlc is right. i had 3 hoses splitting.

    i inspected the 2 vac hoses that attach to the throttle body, both were split.

    also, the vac hose from the fpr (fuel pressure regulator) to the intake manifold was split also. it was so brittle that it snapped when i stretched the bend out.

    be sure to get the right kind of vac hoses that can take gasoline vapors.

    i just barely passed my NOx emissions with some of these split hoses. lots of unmetered air coming in and the vacuum to the fpr was not working properly.

    there are other vac hoses too.

    regards,
    byron golden
    86 245
    92 245







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.