Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

line pressure 200 1982

posted by  someone claiming to be losing fool,i mean fuel on  Thu Oct 28 16:52 CST 2004 [RELATED]

i have a leaking(spraying) plastic fuel line that runs between the fuel filter at the firewall back to the pump area,it has a banjo fitting at the front end and what looks like a flared end fitting at the rear end.i will remove this line in the morning and take it down to the local "high pressure line rebuild shop"at which time the man will ask me whats the p.s.i. coming from that pump?anybody know?its an 82 240 norh american fuel injected (continuous).
thanks
or............can i just repair the bad area with ribbed couplings?
thanks








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

line pressure 200 1982

posted by  porkface on  Fri Oct 29 00:34 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:12 CST 2014
[RELATED]

line pressure is 85 psi or so. good luck, chuck.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

thanks 200 1982

posted by  someone claiming to be losing fool,i mean fuel on  Fri Oct 29 01:21 CST 2004 [RELATED]

thanks







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.