Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

VX cam - hard to install?? 900

posted by  Dangerous Dave on  Sun Oct 24 11:34 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

hi everyone,

I'm considering the vx cam.

I just need to know how hard it is to install (basically what I need apart from the cam) will i need new shims, etc.

Any help much appreciated

Cheers guys

1991 944 B200F, 128,000 miles







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

VX cam - hard to install?? 900

posted by  Irollturbo on  Sun Oct 24 16:57 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 6 14:36 CST 2014
[RELATED]

If you can do a timing belt then you can do the Cam install. Count on having to adjust the shims.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

VX cam - hard to install?? 900

posted by  porkface on  Sun Oct 24 13:51 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:12 CST 2014
[RELATED]

i put a k cam in a customer's car last summer. i had to change 2 shims, all the rest were fine. i figured on having to do more, you might, anyways. only way to tell is to install it and check the adjustment. good luck, chuck.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.