Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2024 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil Pressure Sensor extention Part Number 200

posted by  jaydee on  Fri Oct 22 19:05 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I am trying ot install a newly received oil pressure sensor on my B23F. Apparently I need an extention pipe that I believe is standard on turbo models. Without the extention, there is insufficient clearance to permit the sensor and oil filter to both be mounted. Can someone provide me with a part number for this extention? According to an email I received some time ago, it is an angled pipe.
Thanks
J Dymond








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Oil Pressure Sensor extention Part Number

    posted by  someone claiming to be matt82dl on  Sat Oct 23 01:37 CST 2004 [RELATED]

    I believe I was able to find a 45° 'Street' Elbow which is an elbow with a male and female end, male end into the block and then the sender into the femal end. IMO it was the cleanest way to do it. HAve fun with the installation!

    matt






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.