Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing ICU & Ignition coil 200

posted by  macs70GLT on  Fri Oct 22 07:08 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 2 07:33 CST 2010
[RELATED]

I have a no-start problem on an 88 240. Some of the things I'm suspecting are the coil & ICU.

Do coils fail often? I have weak spark, but measure 12.3 Volts at term 15 which drops to 10.3 Volts at cranking. The volvo dealer doesn't stock coils, he suggested the ICU may be the culpret.

For the ICU I assume I need one from model years 1985-1988; B230F engine with Volvo/Chrysler ignition (p/n 3517641 on mine).
Any way for me to check mine?
I haven't been able to backprobe the wires at the connector. Can't get a probe in there. I can get a used one for $150. The parts place told me I just need new pins for the cable. Bentley suggests replace the cable that connector gets destroyed doing R & R. Is this true?

Thanks for the help.

Mike
1988 245 217K usually running!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Changing ICU & Ignition coil [200]
posted by  macs70GLT  on Fri Oct 22 07:08 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.