Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Storing an engine - how? 200

posted by  Erling on  Thu Oct 21 02:11 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed May 22 00:57 CST 2013
[RELATED]

I am busy breaking an '86 240GLT (Euro, meaning B230E engine, no turbo). With two 240s on the road, I intend to store the 115K miles engine as a spare. Could be I need it next year, could be never. Question is, what is the best way to store it? I have thought of a few points myself:

- Do an oil change.
- Run the engine, and spray an oil mist into the air filter box until it stops (same way as I winterize my outboard and lawn mower).
- Remove the plugs and spray an oil mist into the plug holes. Run the motor on the starter for a couple of seconds.
- When out of the car, block all holes with oily rags.

What else? How do I prevent rust in the cooling passages?
I have purchased this stand for it, BTW:



I will also keep the AW-70 transmission. Do I just plug the holes for the oil lines and that is it?

Erling.

PS: Look at me – three years ago I started with two empty hands. Now I've got 2½ old Volvos on my yard. It's a disease, right?

--
My 240 Page






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Storing an engine - how? [200]
posted by  Erling  on Thu Oct 21 02:11 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.