Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2010 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Broken IAC Connector on '88 240 200

posted by  jdm on  Tue Oct 19 02:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Apr 6 11:42 CST 2014
[RELATED]

Good Morning,

I was cleaning the throttle body on my '88 240 this weekend and decided to remove and clean the IAC as well. When I depressed the wire retaining clip to remove the connector at the base of the IAC the wire clip broke in half and the connector chipped at the corner. I finished the clean-up and put everything back together, using a quality electrical tape around the IAC connector once it was plugged back into the base.

The car runs fine, but I am not comfortable relying on the tape to hold the connection, can a replacement connector be purchased or am I going to have to make a trip to the junk yard for a replacement and then splice it in? Thanks in advance for your suggestions.


John








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Broken IAC Connector on '88 240 200

posted by  philvo on  Tue Oct 19 06:59 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 14:26 CST 2014
[RELATED]

John,
I have one from an '87 or '89 if you want it.make an offer.
phil
--
philvo '90 240 204k and a couple parts cars







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.