Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2011 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Seriously messed up my Timing 200

Was trying to add a advanced timing gear and when I had everything installed the engine started and ran like crap. Now after putting everything back together the engine doesnt start. Really messed it up and don't know hot to fix it. Any tips?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Seriously messed up my Timing 200

Ok try this attachment and see if it helps.. also look at /IMAGELIB/images/4106.jpg for a look at the crank gear...\../ :)Max
--
Max..1989 244 DL 5 Spd., Bilstein HD, Turbo Swaybars, Poly Bushings all round, Turbo Wheels, Black leather interior, Electric mirrors, LED dash and gauge lights.









  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Seriously messed up my Timing 200

Uhhh, yeah, crank at TDC, cam gear on the mark (assuming your key pin is still in the cam and the gear) and dizzy aimed at the mark on the edge. Easy as falling off a log.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.