What kind of HP & torque was this engine rated with stock and at what RPM.
also how much does it weigh? and how long is it from bell to crank pulley?

thanks

about 125 horsepower in the real world, book states 102 horsepower. Torque is around 150 pounds max and I believe the book rates it at 42 newton meter however experience leads me to the higher figures over the "SAE-J245" ratings used in the USA. Weight is 535 pounds dry with all accys mounted and Hitachi starter, around 540 with the fatbob Bosch starter.
Picture on the left in my profile is an original D24T car with european spec head and injection pump, 240 wagon on right is my sons that now sports a D24T with automatic, both chassis are over 300K miles new.

Actual performance? Play your cards right with the 4sp OD trans and you can get under 12 seconds 0-60 MPH with MPG figures in the high 30's keeping your foot out of it.

Length? This Im not sure of, Would venture to guess around 28 to 32 inches pulley to flywheel, never measured one.

988

SAE 106 hp@4800 rpm, 140ft lbs@2400rpm

This is assuming you mean a 700 turbo diesel
Weight including starter and alt 500 lbs

length......I'll try to remember and go out and measure one later
--
-------Robert, '93 940t, '90 240 wagon, '84 240 diesel (she's sick) , '80 245 diesel, '82 Mercedes 300SD