Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Need details to adjust a '93 240's AMM. 200 1993

posted by  Ken C on  Sat Oct 9 07:08 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:39 CST 2014
[RELATED]

I couple of years ago I followed this advice (I saved it exactly) for adjusting the AMM on my '84 240.

"...I just replace my '86 245 AMM and set the resistance between terminal 2 and 6 at 300 ohms using the screw. Runs fine and passed emission with flying colors...."

Now, I'd like to check the AMM on my '93 -- is this advice (300 ohms, between terminals 2 and 6) still valid, or are there different instructions for the '93 (obviously, the injection system is different, so I thought the AMM might be, too).

Thanks.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need details to adjust a '93 240's AMM. [200][1993]
posted by  Ken C subscriber  on Sat Oct 9 07:08 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.