I HAVE A 1990 240 AND JUST PURCHASED AN AUX COOLING FAN FROM A NEWER 240, HOW MUCH OF A JOB IS IT TO MOUNT THIS ? WHICH WAY DOES THE FAN FACE ,,I ASSUME THE SEALED FACE OF THE FAN FACES THE GRILLE. ALSO WHERE DO THE MOUNTING BRAKETS BOLT TO ?? I DO NOT HAVE THE FAN YET,,IT IS ON THE WAY,, BUT I'M ALL SET WITH THE WIRING AND JUST NEED MOUNTING ADVICE,, OR BETTER YET A PICTURE WITH THE GRILL REMOVED SO I CAN SEE THE FAN IN PLACE....

THANKS

I do not know if that last post hit the board but this is waht I was posting.. I installed mine late at night using only a small drop light so it can not be too difficult..Anyway if you will check one of my posts from last month or maybe before that there is a pic on the post of what the mounting bolts and brackets attach to. The fan is a pusher type so just wire it up temporarly to see which way the air flows,, the air should blow into the radiator from the front of the car..And yes I do believe that the sealed part is next to the radiator,,The mounting brackets go into the upper frame that supports the radiator, there are threaded holes made into it. The other baraket goes on the lower support. And as in mine there were two other round brackets(not sure what mine fit originally)that bolted to the center support frame that holds the horns. I will try to edit this post with the site for the pic that was sent to me.. Good luck,, and the fan it well worth the effort to install as it provides great cooling when the aircond is on..oh by the way wire the relay to the air compressor wire then to the fan,, I will also try to find the wiring diagram for this too......Max..Ok found the wiring diagram ,, email me and i will send it and the pics for the mounting as they are a bit large to post here..Actually I am not a computer genius so I can not load them ,, Max

--
Max..1989 244 DL 5 Spd., Bilstein HD, Turbo Swaybars, Poly Bushings all round, Turbo Wheels, Black leather interior, Electric mirrors, LED dash and gauge lights.

maxspeed,
I found your old post with the picture of the aux fan,, yea !!,,
I'LL let you know how the install goes,,,thanks
jimmy volvo

There are two types so there are two different ways to mount.
I bought one on ebay that is 1 7/8 inches deep (shroud) and it won't go in my '85 because it is too thick.
The one that goes in the "85 and older is thinner.