Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

ECT Sensor Malfunction 900 1994

Can the connection from the ECT sensor to the ECU connector be replaced without replacing the entire wiring harness? I've narrowed my hot start problems down to my engine coolant temperature sensor. The connector to the sensor is loose an will move up/down even once snapped locked into place.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ECT Sensor Malfunction 900 1994

My guess would be that it might be easily patched without problems... especially if it's just the point at which it connects to the sensor.

In any event, it'd be smart to try that first before trying to redo the wiring harness.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.