Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

When to replace bushings? 900 1994

posted by  mesint on  Wed Sep 29 02:55 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I recently purchased a 94 960 wagon with 135K, and I am going through all of the maintenance items listed in the FAQ. I didn't see anything in there about replacing bushings/ball joints/wheel bearings. The car seems to ride and handle well, and I don't notice any clunks with the possible exception of going over a sharp bump at very low speed. Underneath the car looks OK, I can see no cracked bushings. The car needs to be safe since my pregnant wife is driving it. Questions:

How do I know when the bushings and/or the ball joints need to be replaced? I really have no point of reference since I just bought the car and it is my first Volvo.

The IPD mag has poly bushings, are these recommended over rubber ones?

Are there certain bushings that need to be replaced over others?

Is this something that a shade tree mechanic like me with a normal tool set (I don't own any special front end tools) can do?

Thanks for any help you can provide!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New When to replace bushings? [900][1994]
posted by  mesint  on Wed Sep 29 02:55 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.