Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2005 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing belt and oil pump question. 700 1990

uid 26758's pic
posted by  slyfox4 on  Sat Sep 25 00:55 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Crank seal was leaking so I replaced the seals, gaskets and timing belt on the B230F engine. I managed to move everything in the process and my book is no help.

1> Cam sprocket .... should be straight up??
2> Crank sprocket .... should have the notch straight up????
3> Oil pump .... does it matter what position the sprocket is in???

Thanks....








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing belt and oil pump question. 700 1990

posted by  Steve on  Sat Sep 25 04:31 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

Bob caught it, but it is also in the 700/900 FAQ.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Timing belt and oil pump question. 700 1990

posted by  rhaire on  Sat Sep 25 01:30 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 4 10:16 CST 2014
[RELATED]

Cam-not quite, locate the raised line on the rear cover piece and align to that.
Crank-not quite, locate the raised line on the rear cover or find TDC with a plastic straw in the cylinder hole.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.