Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Piston size 200

posted by  someone claiming to be brickme on  Fri Sep 24 13:24 CST 2004 [RELATED]

What's the stock size of a b21 piston (in mm)? I've got a set that are 91.99mm and I'm not sure if its an oversize or what. Any insight?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Piston size 200

posted by  porkface on  Fri Sep 24 15:05 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:12 CST 2014
[RELATED]

those are stock. b21 are 92mm, b23 are 96. each piston is sized to it's bore. there's a letter stamped in the block next to the bore, a, ,b ,c and d. i forget exactly which letter is what size or the differences between the sizes. keep in mind, if you go to a store and order std. pistons, they will be 92mm, not 91.99, 91.98 or whatever, and they will fit the bores in the block, regardless of the letter size. and so it goes, chuck.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.