Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2015 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

760 low beams and bulb failure relay 700 1986

A couple of weeks ago, the low beams on my '89 760 failed to come on after having been on high beam. The high beams worked. As I clicked up and down, the low beams worked again and have been OK since. I would like to deal with this before it happens again, so I read the FAQs and concluded I may need a bulb failure relay. Also reading from the FAQs, it sounds like this relay is permanently attached to the relay bord. If that is true, how do I replace the relay?
Thanks for any advice.
Alan








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    760 low beams and bulb failure relay 700 1986

    Are you sure you need a bulb-failure module ? From your post it sounds more like a problem with your headlight switch module...








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      760 low beams and bulb failure relay 700 1989

      I'm not sure, but the FAQs suggest the relay is the most likely culprit. The lights are working now, so I can't troubleshoot. We use the car daily and I was trying to prevent the problem in the future. I don't like driving around wondering when the lights are not going to work. Maybe I will just have to wait until they stop working again.
      Alan







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.