Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2012 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

getting that last bolt off the intake manifold. 200 1982

how do i do it?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

getting that last bolt off the intake manifold. 200 1982

start with that one. last one will be easy








  REPLY TO THIS MESSAGE    PRINT   SAVE 

getting that last bolt off the intake manifold. 200 1982

MINE HAS NUTS








  REPLY TO THIS MESSAGE    PRINT   SAVE 

getting that last bolt off the intake manifold. 200 1982

On the K-Jet, assuming last one is the one that is next to impossible to get off (i recall one of them being a real ass) I had to set up a wierd socket combo with a couple of short extensions and some of those u-joint extensions until I found a combination that works. Also, use a 1/4" socket set instead of the standard 3/8" size if you got one ... they take up less space and are easier to maneuver.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

getting that last bolt off the intake manifold. 200 1982

depends which is the last, and if your '82 has K-Jet or LH-Jet.
--
'73 142, '75 242, '75 245, '80 245, '83 244, '86 244, '87 745T, 92 244 (for sale)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.