Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2006 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

blower switch or blower motor? 200 1990

posted by  someone claiming to be jerryjcarnut on  Mon Sep 6 11:20 CST 2004 [RELATED]

Which wires do I put together to determine if blower is working? The switch has about five wires running to it.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    blower switch or blower motor? 200 1990

    uid 25253's pic
    posted by  Cabbie2169 on  Mon Sep 6 13:58 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    You may be able to look it up in the Bentley manual...or maybe you can replace the switch and try. I don't know..but I'd try the fuse first, then replace the switch..then go from there. The blower fan is common failure on the cars..plus the resistor. If you replace the blower motor, be sure you replace the resistor too.
    Cabbie2169







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.