Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2013 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Noisy belt 900 1991

uid 6185's pic
posted by  blue940 on  Sat Sep 4 18:19 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 21:11 CST 2014
[RELATED]

The crank/water pump/power steering belt on my 91 940GL squeeks quite loudly when the engine is cold. It also does it when hot but not quite as loud. I have tried spraying belt dressing but that only lasts a day or so. I've had a look at the power steering pump and it seems to be out of alignment. The front is "pointing" in towards the engine. The pump mounting does not have any bushings on it. I can slacken off the belt pull the pump straight and retighten the belt but the pump seems to turn in again after a few days. Could this be a bent bolt or an elongated hole somewhere?
Any thoughts appreciated.

Regards
Brad








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Noisy belt 900 1991

posted by  Steve on  Sun Sep 5 01:49 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

See the 700/900 FAQ: the alloy p/s pump bracket has worn and needs replacement. This cause the pulley to go out of alignment.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.