Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2008 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Reset lambda light on 1995 960 UK RHD 24v 3lt model 900

Hi

I need to reset the lambda light on my 965 having had the exhaust replaced. The lamp came on when the exhaust (muffler?) blew.

I've read the FaQ on this and think (!) that only a dealer with a magic box can do this one, but can anyone pls. confirm?

Thanks & brgds

David








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Reset lambda light on 1995 960 UK RHD 24v 3lt model 900

    No problem with a '95. Just follow the procedure as described in the 700/900 FAQ ('Fuel Injection and Ignition Diagnostic Procedures in Bosch LH-Jetronic 2.4+, Regina, and EZK 116/REX 1'). This headline is a bit misleading since your car has got the Motronic 1.8 FI system but the instructions are applicable anyway.

    Please note that any stored codes other than 1-1-1 has got to be retrieved before you can erase the system memory. Another way of erasing the codes is to simply disconnect the battery for a minute or two. This doesn't work with the smarter :-) trans ECU, though.

    Martin
    --
    '65 121, '73 165







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.