Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 1800 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

65s/71e IPD sway bars 1800

posted by  jaydee on  Fri May 28 15:50 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I have a 1971 E parts car with a set (front and rear) of IPD sway bars on it that I would like to put on my 65S. Other than the different diameters on the rear U-bolts (2.25 for the earlier car and 2.5 for the later one) is there any other obstacle I will be facing in making the switch for both the front and rear bars? Has anyone else made this swap, and if so, what other things will prevent/slow me in making the changeover?
Thanks
JD








  REPLY TO THIS MESSAGE    PRINT   SAVE 

65s/71e IPD sway bars 1800

posted by  lee on  Fri May 28 19:41 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 1 22:19 CST 2013
[RELATED]

Should be a bolt in, as soon as you get the right size u bolts for the rear.
--
Lee







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.