Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2015 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OK - now how do we get this FCP Groton condenser to attach? 900 1991

posted by  Andrew in AL on  Thu May 27 14:58 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:17 CST 2014
[RELATED]

Another post for Ben. He is hard at work trying to get the R134 conversion finished for the 91 940T.

He got a new condenser from FCP Groton (Air Products- Crane for 145.00)and is trying to figure out how to attach it. The old one that was busted had two nipples at the bottom that fit into slots below through gromets. This one seems to not have any of this.

Anyone done this - can give hints?

Thanks
Andrew in AL
--
'94 940T (160K) , '92 745T (200K+)








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OK - now how do we get this FCP Groton condenser to attach? 900 1991

posted by  Rule 308 on  Thu May 27 18:44 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 8 09:20 CST 2012
[RELATED]

Sounds to me like you have the wrong one if it does not have the little pins on the bottom of it.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.