Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

I jumped the temp compensation board, now problems with dash light 200

So my termperature gauge was acting up and I decided to jump from connector 1 to connector 3 as illustrated in previous posts.

Now my night-time dash illuminator lights are not working, the up-shift indicator light is also not working (though I don't care about this as much).

Any suggestions?

Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

I jumped the temp compensation board, now problems with dash light 200

Pull the cluster back out and make shure that all connections are correct and that everything is as tight as it can be.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I jumped the temp compensation board, now problems with dash light 200

Did you try adjusting the rheostat that controls the dash lights? Perhaps you turned it down/off when removing the cluster.

Randy








  REPLY TO THIS MESSAGE    PRINT   SAVE 

I jumped the temp compensation board, now problems with dash light 200

Yeah, I tried this. The lights are still out.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.