Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

What Goes on the End? 200 1987

posted by  AndrewinNC on  Sun Mar 28 08:16 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi Bricksters:

Just spent about 6 hours changing out my old dash for a second hand one (w/no cracks), but obviously it was from a newer model than my '87. Old dash had the cutout for the mono radio speaker, while this one does not. Also, on the driver's side there were two metal tabs for screws that were not on the previous dash. This caused some issues while reinstalling the column shroud. In particular, what is supposed to be on the far left hand side, under the air supply vent? Old dash had more molded plastic & foam like the passenger side. This is as if something is missing. Any ideas?

Thanks as always for your insight.

Andrew Sugg
Durham NC
'87 240GL
97K







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

What Goes on the End? 200 1987

posted by  clbolt on  Sun Mar 28 08:44 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 26 06:52 CST 2001
[RELATED]

It sounds like you got a pad from an airbag car, and you're missing the knee bolster. It would look funny without it.
--
1991 245, 61k miles, looking for a 5 speed 92-93 245 cheap.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.