Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Turbo front sway on '92 240, can I use '92 brackets? 200

posted by  someone claiming to be Josh on  Mon Feb 16 03:51 CST 2004 [RELATED]

have '84 front sway and want to put it on my '92 am wondering if I have to buy new bushings/brackets to accomodate or can I use existing hardware.

Thanks, Josh








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Turbo front sway on '92 240, can I use '92 brackets? 200

    posted by  wongg3 on  Mon Feb 16 14:17 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Tue Oct 21 20:12 CST 2014
    [RELATED]

    So the turbo front sway is 23mm, correct? You will need to get the 23mm busings, new is the best choice, but at the dealer, they only have the new style 23mm bushings. This means you will need to buy the new style brackets as well. All of the parts you need aren't that expensive, though.

    Do you have a better rear sway bar as well?

    Greg
    --
    http://home.earthlink.net/~greg.wong/








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Turbo front sway on '92 240, can I use '92 brackets? 200

    posted by  yama on  Mon Feb 16 05:21 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 25 05:26 CST 2013
    [RELATED]

    Just put a Turbo bar on my 1990. I used the orginal brackets but bought a new bushing. Make sure you get a Turbo bushing with the correct diameter. My Turbo bar was 23mm.
    --
    1990 240 Sdn 277K,tach,strut brace,turbo sway 1990 240 Wgn M47II 157K,tach,strut brace,poly bushings,IPD sways








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Turbo front sway on '92 240, can I use '92 brackets? 200

    posted by  rhaire on  Mon Feb 16 04:47 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Aug 4 10:16 CST 2014
    [RELATED]

    The bracket and bushing for the thin bar will not work too well with the 23 mm turbo bar. If you had the turbo bracket, there is a poly-u bushing that works but you might be stuck. Look for a 245T which will have the front turbo bar and a useless rear bar. Maybe the brackets can be had there.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.