Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

$55 for parts and labor... 900

posted by  someone claiming to be xallenx1 on  Thu Jan 29 11:24 CST 2004 [RELATED]

...this is to change the fuel filter on my car. Is this a good deal or are they trying to pull a fast one one me..thanks.

xallenx
91 940 SE








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    $55 for parts and labor... 900

    posted by  porkface on  Thu Jan 29 14:50 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:12 CST 2014
    [RELATED]

    for all the gas that runs down your arms when you do this job, 55 is ok. i miss the old ones on the firewall. much less mess. good luck, chuck.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    $55 for parts and labor... 900

    posted by  Park on  Thu Jan 29 14:05 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Tue Apr 22 07:46 CST 2014
    [RELATED]

    I changed my share of em and the other Brickheads are correct, price is resonable. After market filter at parts store is 15$, Volvo OEM 24$, big heavy filter, not little plastic junk as you may be thinking. Banjo bolts some times sieze in filter, sometimes you break the small plastic pre-formed fuel hose from pump to filter, you have to discharge line pressure and duck too. It is not a fun job I have found.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    $55 for parts and labor... 900

    posted by  someone claiming to be greg_mustang on  Thu Jan 29 11:35 CST 2004 [RELATED]

    yah it's good, it could be a messy job and make sure he installs new copper o-rings... good idea to put in a new check valve too since he would have the assembly down. It's only another 5 minutes.

    Cheap, go for it. Use good parts.

    Greg Mustang







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    $55 for parts and labor... 900

    posted by  the kick inside on  Thu Jan 29 11:35 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Thu May 17 09:58 CST 2007
    [RELATED]

    sounds good to me...

    a non gen filter is £7 (cira $12)...so that leaves $43 for labour....

    well thats about an 1/2 hour - 45 mins at a shop (if your lucky...)..

    to do that job...sounds reasonable to me...would take me AT LEAST that long...







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    $55 for parts and labor... 900

    posted by  someone claiming to be Bostonbrowser on  Thu Jan 29 11:33 CST 2004 [RELATED]

    If you find anyone who will do it cheeper let me know. 55 bucks is very reasonable.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Taking my car there.. 900

      posted by  someone claiming to be xallenx1 on  Fri Jan 30 05:20 CST 2004 [RELATED]

      ...yeah, this place is called Reputable Volvo..The previous owner took the car over there and they only specifically work on volvos. They must get good business cuz Charleston is like the volvo capital..everywhere i turn there are volvos running around..ha!!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.