Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Seal Behind Distributor Cap? 900 1993

posted by  someone claiming to be Petiboy on  Thu Jul 31 02:55 CST 2003 [RELATED]

Hi folks,
I have a 93 940Turbo and am leaking oil behind the distributor Cap, Is there a seal behind this and is it replacable?.

Thanks,








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Oil Seal Behind Distributor Cap? 900 1993

    uid 55's pic
    posted by  john sargent on  Thu Jul 31 13:50 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 09:07 CST 2014
    [RELATED]

    Yes, this is well covered in the 700/900 FAQ. If you don't want to do it yourself, let me know and I can exchange you with a refurbished disdributor.

    Go to Distributor Shaft Seal Replacment for the details in the FAQ. Your distributor won't have the Hall effect, but that does not effect the seal replacement.
    --
    john








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Oil Seal Behind Distributor Cap? 900 1993

    posted by  Andrew in AL on  Thu Jul 31 03:40 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 06:17 CST 2014
    [RELATED]

    Good time to check for carbon tracking under the cap cover. Too much carbon back there will make a no run situation (personal experience).

    Andrew in AL
    --
    '91 940T (198K) , '94 940T (145K) , '92 745T (170K)








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Oil Seal Behind Distributor Cap? 900 1993

    posted by  greg_mustang on  Thu Jul 31 03:15 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sat May 10 07:26 CST 2014
    [RELATED]

    rear cam seal, replacable... Likly at the same time a good idea to just remove the cam cover, do that seal along with the rear cam seal.
    Not a hard and not an expensive job.

    Greg Mustang
    Montreal - Ottawa
    Canada






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.