Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

thermostat and valve shim availability for B230F 200

I want to replace the thermostat and adjust the valve clearances this weekend. Will I need to go to the volvo dealer to get the appropriate thermostat (with jiggle pin) and valve shims? Does NAPA or a discount autoparts house carry any of this stuff?

Thanks,
Tom
'86 245 DL








  REPLY TO THIS MESSAGE    PRINT   SAVE 

thermostat and valve shim availability for B230F 200

You can get the right thermostat from the discount auto stores. I got my thermostat at autozone for $6 last week.

Charles 1985 245ti








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

thermostat and valve shim availability for B230F 200

IPD has the kit, lots of shims in salvage yards (you can build a collection with effort) and some VWs apparently use the same shims. It is nice to have the IPD kit because you only pay for what you use and your car is not down while you run around for shims. But it is really great if you can get a group and do 3 or more cars.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.