Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

thermostat and valve shim availability for B230F 200

uid 17010's pic
posted by  tvg on  Wed May 28 04:07 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 21 14:10 CST 2007
[RELATED]

I want to replace the thermostat and adjust the valve clearances this weekend. Will I need to go to the volvo dealer to get the appropriate thermostat (with jiggle pin) and valve shims? Does NAPA or a discount autoparts house carry any of this stuff?

Thanks,
Tom
'86 245 DL







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    thermostat and valve shim availability for B230F 200

    posted by  rhaire on  Wed May 28 05:42 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Aug 4 10:16 CST 2014
    [RELATED]

    IPD has the kit, lots of shims in salvage yards (you can build a collection with effort) and some VWs apparently use the same shims. It is nice to have the IPD kit because you only pay for what you use and your car is not down while you run around for shims. But it is really great if you can get a group and do 3 or more cars.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.