Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Adding gauges to a 940???? 900 1994

posted by  Chuck Jaxel on  Tue Apr 29 22:14 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 11 15:58 CST 2014
[RELATED]

Was kicking this around and thought I'd ask. Has anyone added gauges, oil pressure, water temp, amp or voltage gauges to their 940s? If so where did you mount them? What type did you use?
Thanks....
Chuck Jaxel....not a big fan of idiot lights....
--
Chuck Jaxel, Pine Hill NJ, Near Philly...








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Adding gauges to a 940???? 900 1994

posted by  mars9569 on  Wed Apr 30 07:00 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 10 16:45 CST 2010
[RELATED]

I have a turbo gauge mounted on the a-pillar in a pod. The type I have is stackable so you could easly mount (3) along this side. May want to check www.greddy.com - type in gauge in the search and a universal gauge pod will be listed.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Adding gauges to a 940???? 900 1994

posted by  dick on  Wed Apr 30 01:26 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 3 15:24 CST 2014
[RELATED]

I have added oil pressure and voltage gauges in the little pocket under the radio. My installation is not the greatest, but it serves well. Used a Dremel to enlarge the hole for first gauge (oil), but then found AutoMeter has smaller gauges that slip right in. You could make a faceplate to slip them into and then into the pocket.

dick








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Adding gauges to a 940???? 900 1994

posted by  doubler on  Wed Apr 30 02:16 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 12 02:02 CST 2001
[RELATED]

Hey Chuck,
I installed a boost guage and a/f meter on my 940t on the plastic housing right behind the steering wheel in front of my speedo, well ,to the side. I mounted them in the buckets. They are perfect for me because those values are more important than speedo and rpm on my car.
Regards
RR








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Adding gauges to a 940???? 900 1994

posted by  admasters on  Thu Sep 7 16:24 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jun 15 15:44 CST 2014
[RELATED]

I 3D printed a boost gauge holder that replaces the left-most vent.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Old post 900 1994

posted by  jwalker on  Thu Sep 7 16:44 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 08:39 CST 2014
[RELATED]

20 year old post

--
Will I buy another Volvo??? We'll see....







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.